Controlling devices

The ZWK10 multi-channel keyboard allows remote control of electrical devices compatible with the Z-Wave system, e.g. Z-Wave roof window, ZWS230 or ZWS12 motors, ARZ Z-Wave or AMZ Z-Wave awning blind, ARF Z-Wave, ARP Z-Wave blinds or AJP Z-Wave Venetian blind. The keyboard can operate up to 10 receivers separately or 231 accessories in groups.

Technical parameters:

• power supply 2x1.5 V, battery AAA
• working temperature (+5°C) to (40°C)
• dimensions 80 x 80 x 35 mm

The ZWP10 multi-channel remote control enables remote control of electrical devices compatible with the Z-Wave system, e.g. Z-Wave roof window, ZWS230 or ZWS12 motors, ARZ Z-Wave or AMZ Z-Wave awning blind, ARF Z-Wave, ARP Z-Wave internal blinds or AJP Z-Wave venetian blind. The remote control can operate up to 10 receivers separately or up to 231 in groups.

Technical parameters:

• power supply 3V battery
• working temperature (+5°C) to (40°C)
• dimensions 170 x 40 x 20 mm

Made of toughened glass this modern-looking, single-channel, touch keyboard ZWG1 enables remote control of one electrical device compatible with the Z-Wave system, e.g. ZWS230, ZWS12 motors, ARZ ZWave, AMZ Z-Wave awning blind, ARF Z-Wave, ARP Z-Wave internal blinds. The ZWG1 keyboard can operate only one accessory separately or up to 231 accessories simultaneously.

Technical parameters:

• power supply 1x3V, battery CR2450
• working temperature (+5°C) to (40°C)
• dimensions 80 x 80 x 10 mm

Made of toughened glass this modern-looking, multi-channel touch keyboard enables control of electrical devices compatible with the Z-Wave system, e.g. Z-Wave roof window, ZWS230 or ZWS12 motors, ARZ Z-Wave or AMZ Z-Wave awning blind, ARF Z-Wave, ARP Z-Wave internal blinds or AJP Z-Wave Venetian blind. The SWG3 keyboard can operate up to three accessories separately or up to 231 accessories in groups.

Technical parameters:

• power supply CR2450
• working temperature (+5°C) to (40°C)
• dimensions 80 x 80 x 10 mm

It consists of a wall switch and radio module fitted in flush mounted junction box. It allows remote control of a single device or a group of Z-Wave devices (up to 231 devices). It operates e.g. actuator ZWS230, ZWS12, external roller shutter ARZ Z-Wave, awning blind AMZ Z-Wave, blackout blind ARF Z-Wave, roller blind ARP Z-Wave and Venetian Blind AJP Z-Wave.

Technical specification:

• power supply 230V AC
• radio protocol - Z-Wave
• button dimensions: 84 x 84 x 41 mm
• radio module dimensions: 42 x 42 x 26 mm
• button colour: white, black
• frame colouri*: white, black
• temperature: (+5°C) do (40°C)

*other colours available to order: black glass, white glass, wood, stone

It consists of a double wall switch and radio module fitted in flush mounted junction box. It allows remote control of two Z-Wave devices independently or a group of Z-Wave devices (up to 231 devices). It operates e.g. actuator ZWS230, ZWS12, external roller shutter ARZ Z-Wave, awning blind AMZ Z-Wave, vertical awning blind VMZ Z-Wave, VMB Z-Wave, blackout blind ARF Z-Wave, roller blind ARP Z-Wave and Venetian blind AJP Z-Wave.
 

Technical specification:

• power supply 230V AC
• radio protocol - Z-Wave
• button dimensions: 155 x 84 x 41 mm
• radio module dimensions: 42 x 42 x 26 mm
• button colour: white, black
• frame colouri*: white, black
• temperature: (+5°C) do (40°C)

*other colours available to order: black glass, white glass, wood, stone

It consists of a triple wall switch and radio module fitted in flush mounted junction box. It allows remote control of three Z-Wave devices independently or a group of Z-Wave devices (up to 231 devices). It operates e.g. actuator ZWS230, ZWS12, external roller shutter ARZ Z-Wave, awning blind AMZ Z-Wave, vertical awning blind VMZ Z-Wave, VMB Z-Wave, blackout blind ARF Z-Wave, roller blind ARP Z-Wave and Venetian blind AJP Z-Wave.

Technical specification:

• power supply 230V AC
• radio protocol - Z-Wave
• button dimensions: 155 x 84 x 41 mm
• radio module dimensions: 42 x 42 x 26 mm
• button colour: white, black
• frame colour*: white, black
• temperature: (+5°C) to (40°C)

*other colours available to order: black glass, white glass, wood, stone

The versatility of Z-Wave communication enables control of FAKRO Z-Wave equipped products even outside the house. The Z-Wave windows, ZWS230 or ZWS12 actuators, external ARZ Z-Wave roller shutters, AMZ Z-Wave awning blinds, interior ARF Z-Wave, ARP Z-Wave blinds or AJP Z-Wave Venetian blinds can be controlled by means of smart-phone or computer.

Installing the Internet gateway equipped with Z-Wave interface, and using a web browser or Z-Wave application, makes it easy to control FAKRO products situated both at home or anywhere in the world.

Hardware and software requirements:

• Gateway Interface Z-Wave (eg. Fibaro, Vera ...),
• Computer, smartphone, tablet,
• Application compatible with Z-Wave gateway.

The ZWMA adaptation module makes it possible to control FAKRO electric appliances equipped with Z-Wave module e.g. Z-Wave window or roller shutter ARZ Z-Wave with the use of other control systems. The module has four double (open - stop - close) digital inputs to which can be connected potential-free signals from various devices e.g external thermostat, time switch, the EIB system, etc. The module enable control of up to 231 devices simultaneously or in four groups maximum.

Technical parameters:

power supply 230VAC

working temperature (+5° C) to (40° C)

dimensions 120 x 80 x 45 mm

The ZWMA1 conversion module is a radio controller compatible with the Z-Wave communication protocol intended for controlling a single device or a group of devices by means of potential-free contacts. These contacts can be controlled using a wall switch e.g. LP1 or the contactor of other control system e.g. KNX, RTS. In addition, this module can cooperate with the Z-Wave controllers of other manufacturers as an additional controller.

Technical specification:

• power supply 230V AC
• radio protocol: Z-Wave
• temperature: (+5°C) to (40°C)
• dimensions: 42 x 42 x 26 mm

Single wall switch with momentary contact allows potential-free control of a single device such as AMZ Electro 12, AMZ Electro Solar, VMZ Electro 12, AMZ Electro Solar or inputs of ZWMA or ZWMA1 conversion modules.

• button colour: white, black
• frame colour*: white, black
• frame dimensions: 84 x 84 x 41 mm

*other colours available to order: black glass, white glass, wood, stone

Double wall switch with momentary contact allows potential-free control of two devices independently such as AMZ Electro 12, AMZ Electro Solar, VMZ Electro 12, AMZ Electro Solar or inputs of ZWMA or ZWMA1 conversion modules.

• button colour: white, black
• frame colour*: white, black
• frame dimensions: 155 x 84 x 41 mm

*other colours available to order: black glass, white glass, wood, stone

Triple wall switch with momentary contact allows potential-free control of three devices independently such as AMZ Electro 12, AMZ Electro Solar, VMZ Electro 12, AMZ Electro Solar or inputs of ZWMA or ZWMA1 conversion modules..

• button colour: white, black
• frame colour*: white, black
• frame dimensions: 226 x 84 x 41 mm

*other colours available to order: black glass, white glass, wood, stone

Flush mounted single wall switch with hold option to operate a single device such as the AMZ Electro 230.

Surface mounted single wall switch with hold option to operate a single device such as the AMZ Electro 230.

This module makes it possible to automatically close the windows compatible with the Z-Wave system in case of change in weather conditions signalised by the sensors connected to the device: ZRD rain or ZWD wind sensors. The ZRD rain sensor and/or ZWD wind sensor should be purchased separately. One module enables control of up to 231 receivers in groups.

Technical parameters:

• power supply 230VAC
• working temperature (+5°C) to (40°C)
• dimensions 160x120x70 mm

This module makes it possible to automatically close the windows compatible with the Z-Wave system in case of change in weather conditions signalised by the sensors connected to the device: ZRD rain or ZWD wind sensors. The ZRD rain sensor and/or ZWD wind sensor should be purchased separately. One module enables control of up to 231 receivers in groups.

Technical parameters:

• dimensions 80x85 mm
• power cable 2x0.25mm2 (5mb in the package)

The detector in cooperation with the ZWMP weather module provides the facility of automatic closing the windows equipped with motors compatible with the Z-Wave system in case of rainfall. This sensor can be used in smoke ventilation systems. The signal from the sensor is taken into account only when the smoke ventilation window is opened for ventilation. In case of emergency opening, a signal from the rain sensor is ignored. The sensor is heated thanks to which its work is unaffected by such interference as mist, dew etc.. The sensor is intended for installation in the open sections of the roof directly exposed to weather conditions.

Technical parameters:

• power supply 8-32V DC
• dimensions 55x50x13 mm
• power cable 3x0.25mm2 (5mb in the package)